← Home

Guides

intermediate

How to Strip Paint From Resin Miniatures Without Destroying the Print

Most paint stripping advice is written for injection-molded plastic and metal, and some of it will ruin a resin print. Here is the resin-safe method, the solvents to avoid outright, and how to scrub a brittle model without snapping it.

→
beginner

Airbrush Priming 3D Printed Miniatures: Thinning, PSI, and a Clean Finish

An airbrush gives you a thinner, more controlled primer coat than any rattle can, which matters on resin prints where the detail is sharp and easy to bury. Here is how to thin primer correctly, what pressure to run, and how to clean up so the airbrush works next time.

→
intermediate

How to Fix a Broken Resin Miniature: Gluing, Pinning, and Hiding the Repair

Resin snaps clean instead of bending. Here is how I glue, pin, fill, and repaint broken miniatures so the repair holds up to actual play and disappears under paint.

→
intermediate

How to Paint Faces on Resin Miniatures: A Step-by-Step Technique Guide

Resin faces are sharper than cast plastic but the technique is different. This guide walks through basecoating, washing, layering, and adding eyes on 3D printed resin miniature faces: from beginner-friendly contrast shortcuts to the full layering method.

→
advanced

Wet Blending and NMM for Resin Miniatures: Advanced Technique Guide

Resin's smooth surface changes how wet blending and non-metallic metal painting work compared to cast plastic or metal. Here's the advanced technique for painters who have mastered contrast and drybrushing and want the next level.

→
beginner

Speed Painting an Army: Contrast Paints and Drybrushing for Resin Minis

You printed 40 minis. Now what? The zenithal prime to contrast paint to drybrush workflow gets a full army to tabletop quality in hours, not weeks. Real batch sequencing, real time estimates.

→
intermediate

Best Resin for Painters in 2026: Which Resins Take Primer and Hold Detail Under Paint

Most resin guides rank by print quality. This one ranks by what happens after: primer adhesion, paint behavior, and how well the finish survives a game night.

→
beginner

Using Contrast Paints on 3D Printed Resin Miniatures: Tips for Better Results

Contrast paints are a natural fit for resin minis, but resin surfaces behave differently from injection-molded plastic. Primer choice, surface prep, and application tips specific to printed models.

→
beginner

How to Drybrush Resin Printed Miniatures

Drybrushing works differently on smooth 3D printed resin than on cast plastic. How to adapt the technique, why you wash first, and the common problems to avoid.

→
beginner

How to Base 3D Printed Miniatures

Texture paste, sand, static grass, and printed custom bases: four ways to finish a base, plus the basing mistakes that spoil a good paint job.

→
beginner

How to Varnish and Seal Resin Miniatures

Resin miniatures chip without varnish. How to apply matte, satin and gloss varnish by spray or brush without frosting or clouding, and how to fix frosting.

→
beginner

How to Paint 3D Printed Resin Miniatures: From Wash to Highlight (Beginner Guide)

A step-by-step painting guide built specifically for 3D printed resin miniatures, covering surface prep, primer, basecoat, wash, and highlight for beginners.

→

Articles